Dometic NDA1402 Manuel d'utilisateur télécharger pdf (Page 20)

Number Instruction Note

00 — —

01 LED panel check All LED segments ON

02 Battery voltage check ”12” → in range between 8,5 - 18 V DC.

“Lo” or “hl” → out of range

03 Air temperature Value in °F → in range, “hl” or “Lo” → out of range, “--” → sensor faul

sensors, freezer + fridge

04 Surface temperature Value in °F → in range, “hl” or “Lo” → out of range, “--” → sensor faul

sensors, freezer + fridge

05 Door switches status ”OP” → open, “CL” → closed

06 Turn AC heater ON ”ON” → turned on, “no AC” → problem

07 Turn fridge heater ON ”ON” → turned on, “--” → problem

08 Turn freezer heater ON ”ON” → turned on, “--” → problem

09 Turn drain heater ON ”ON” → turned on, “--” → problem

10 Turn door heater ON ”ON” → turned on

11 Turn fridge fan ON ”ON” → turned on, “--” → problem

12 Turn freezer fan ON ”ON” → turned on, “--” → problem or “bL” → blocked

13 Turn gas ignition system ON ”FL” → turned on flame, “l9” → sparking, “--” → problem

SERVICE MODE

Service mode is intended as a tool for service personnel only in order to perform diagnostic troubleshooting.

1. Before entering service mode, switch off the refrigerator with the ON/OFF key.

2. To enter service mode, press and hold SET key, then press ON/OFF key.

3. Press SET key to toggle the list of functions step by step.

1 2 ... 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Dometic NDA1402 Manuel d'utilisateur Page 20