Dometic VT2500 Manuel d'utilisateur télécharger pdf (Page 7)

Changing the filter

The filter in the base station must be changed according to the number of times it has

been used, at the latest, however, after three years.

Putting out of operation

If the vehicle is not going to be used for a longer period of time, especially in the

winter months, proceed according to the following instructions:

1. After the water tank has become empty in the normal way, or the vehicle pump is

switched off and the green lamp indicating "ready" for operation illuminates, press the

pedal without allowing any water to enter.

2. Repeat this procedure a second time.

3. Then empty and clean the cassette.

4. Insert the cassette again and turn off the power supply.

5. The inlet valve for the water flushing (located underneath the pedal) must

be emptied (see Fig. below).

5.5

valve

Unscrew the lock nut and

press the pedal with the

water feed turned off.

The water escapes from the

valve.

Then screw on the lock nut

again.

5.4.1

Remove the cover

filter (242 6001-14/1)

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Pas de commentaire

Dometic VT2500 Manuel d'utilisateur Page 7