Dometic RM1350 Manuel d'utilisateur Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 40
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
- 4 -


In the U.S. the installation must conform with:
National Fuel Gas Code, ANSI Z223.1/NFPA 54 •
(latest edition).
Recreational Vehicles Code, ANSI A119.2 (latest edition).•
Manufactured Home Construction and Safety Standard, Title •
24 CFR, Part 3280.
If an external electrical source is utilized, the refrigerator, when
installed, must be electrically grounded in accordance with
local codes or, in the absence of local codes, the National Elec-
trical Code, ANSI/NFPA 70 - (latest edition).

Natural Gas and Propane Installation Code, CSA B149.1•
CSA Z240 RV Series, Recreational Vehicles.•
Current CSA Z240.4, Gas-equipped Recreational Vehicles •
and Mobile Housing.
If an external electrical source is utilized, the refrigerator,
when installed, must be electrically grounded in accordance
with local codes or, in the absence of local codes, the Canadian
Electrical Code, CSA C22.1, Parts I and II - (latest edition).
CERTIFICATION AND CODE REQUIREMENTS
VENTILATION REQUIREMENTS
The lower vent of the recommended kits is provided with proper
size openings. The flow of combustion and ventilating air must
not be obstructed.
The lower side vent is fitted with a panel, which provides an ad-
equate access opening for ready serviceability of the burner and
control manifold of the refrigerator. This should be centered on
the back of the refrigerator.
GENERAL INFORMATION
Provide necessary air circulation over the cooling unit. Open-
ings for air supply or for venting of combustion products shall
have a minimum dimension of not less than 1/4 inch.
Certified installations require one roof vent and one lower side
vent. Proper installation requires one lower fresh air intake
and one upper exhaust vent. The ventilation kits shown in this
manual have been certified for use with RM1350. The ventila-
tion kits must be installed and used without modification.
The certified vent system kits are listed in the following table.
For further information, please refer to the “
REFRIGERATOR
VENT APPLICATION GUIDE”,
rev, 825128400 or later.
Side vent cutout
LOWER VENT CUTOUT
13-5/8”
28-5/8”
CERTIFIED VENT SYSTEM KITS
Kit no. Components Part no.
5A =
Option 1
Roof Base
Roof Cover
Side Vent
3103633.XXX* or 3310893.XXX*
3103634.XXX* or 3310894.XXX*
3109349.XXX*
Option 3-E Upper side vent
Lower side vent
3109349.XXX*
3109349.XXX*
* Fill in “XXX” with color code numbers. For color codes, contact
your supplier.
An opening toward the outside at floor level in the refrigerator
compartment has to be provided for ventilation of heavier-than-
air fuel gases
INSTALLATION INSTRUCTIONS
CAUTION
It is of especially importance that the airflow


obstructed. Items placed in the vicinity of the


Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 39 40

Commentaires sur ces manuels

Pas de commentaire