Dometic RM1350 Manuel d'utilisateur télécharger pdf (Page 6)

- 6 -

A length of sealing strip is applied to the rear surface of

the front frame for this purpose. The sealing strip should

provide a complete isolation of the appliance’s combustion

system from the vehicle interior.

A wood strip must be in

place across the upper

opening of the enclosure.

The top frame of the

refrigerator will be an-

chored to the wood strip

with screws.

•

VENTILATION REQUIREMENTS

CLEARANCES

Minimum clearances (in inches) to combustible materials:

Top (G) 0

Side (K) 0

Bottom (L) 0

INSTALLING THE REFRIGERATOR

The refrigerator must be installed in a substantial enclosure

and must be level.

Do not install the appliance directly on carpeting. Carpet-

ing must be removed or protected by a metal or wood panel

beneath the appliance, which extends at least full width and

depth of the appliance.

All areas within the recess in which the refrigerator is

installed must be sealed. Make sure that there is a complete

seal between the front frame of the refrigerator and the top,

sides and bottom of the enclosure.

•

Be careful not to damage

the sealing strip when the

refrigerator is put in place!

Wood strip

INSTALLATION INSTRUCTIONS

SIDE VIEW WITH DUCT SYSTEM

Air channel

For installation instructions of the Air Channel, please refer to

“VENT INSTRUCTIONS INSTALLATION SUPPLEMENT”,

Rev. 825128400 or later.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Dometic RM1350 Manuel d'utilisateur Page 6