Dometic RM 7271 Manuel d'utilisateur

miniBarcompressorRHC 460RHC 860ACMBC 600AType HC20/60822 6100-35ENGLISHINSTRUCTIONS for USEINSTALLATION INSTRUCTIONST.D. 03/2003SERVICE OFFICEThe Dome

Check List105.4Failure : No cooling (the aggregate at the back of the device is cold). Possible Cause Self Help Authorised Servicea.) The thermostat

11Environmental AdviceminiBars manufactured by Dometic GmbH are free from CFCs / HCFCs and fluorinated hydrocarbons.The cooling unit uses R134a as th

Dometic GmbHIn der Steinwiese 16D-57074 SiegenGERMANYTel.: +49-(0) 271 / 692 0Fax: +49-(0) 271 / 692 300www.dometic.de/minibarwww.dometic.com© Dometic

21.0 INTRODUCTION 32.0 FOR YOUR SAFETY 32.1 Warnings and Safety Advice 32.2 Coolant 3 3.0 WARRANTY AND 3CUSTOMER SERVICE4.0 INSTALLATION 44.1 Th

3INTRODUCTIONYou have made an excellent choice by choosing the Dometic miniBar. We are convinced that you will be satisfied with your new

4INSTALLATIONThe Purpose of this ManualThe manual shows you how to: install the miniBar correctly. operate the miniBar correctly. guarantee the min

5Technical DataConnecting the Device to the Electricity Supply The device must be connected to a properlyearthed socket in line with the relevant val

6Installation4.81. The miniBar must be level both directions.2. There should be 20mm clearance to the wall.3. Ventilation must be provided as shown in

Changing the Sliding Hinge4.91.2.3.4.Distance to cupboard door (A)A1. When closed, the cupboard door (A) must not lie against the rest of thesurroundi

8Changing the Doorhang 1.2.3.4.5. 6.7.8. 9.10.11.R12.13.RLL4.101.2.1.2.

95.15.355..005.2 The device must be plugged into a properly earthed socket.  The miniBar achieves its operatingtemperature after approx. one hour.IN